The VS100G uses a pair of studs mounted in the guitar body with a knife edge resting against them forming the fulcrum on which the tremolo pivots. The height of the bridge can be adjusted by turning the mounting studs in or out; the studs are non-locking.
The bridge has six independent stainless steel saddles the height of which can be adjusted using two small allen posts. Intonation is adjusted and locked down using a allen bolt through each saddle. The string spread is 2-1/8" (54mm) and the studs are spaced at 56.8mm. A 41mm deep stainless steel sustain block extends beneath the bridge.
The 5.5mm diameter removable stainless steel arm is retained by a nylon collar which allows for tension adjustment.
The VS100G is used on the RG521QS model.